4/11/2023 0 Comments Check shuttercount on gh4![]() ![]() ![]() ![]() The GH4 shoots NTSC at 23.98, 29.97 and 59.94 fps, PAL at 25 and 50 fps and Cinema at 24 fps. Full 4K video is actually 60p so the camera falls short in that regard. One positive about the Four Thirds format is that you can attach accessories, like the Metabones Speed Booster, and use more of the lenses you already have.īut the big news is that this camera can shoot 4K video, either Quad HD (3840 x 2160) at up to 29.97p or Cinema 4K (4096 x 2160) at up to 24p. So at 4k the crop increases so a 45mm lens will be the equivalent of a 105mm lens when shooting 4K video. It’s a two times crop when shooting HD and 2.35 times when shooting 4K. The GH4 still uses the Micro Four Thirds system, with a sensor size smaller than traditional 35mm. The GH4 has a new autofocus system with improved continuous-shooting focus. The sensor provides faster readout to minimize rolling shutter issues. Unlike the GH3, the GH4 offers zebra and focus peaking for better manual exposure and focus. Some of the differences between the GH3 and the GH4 are the new camera sports a 1024×768 OLED viewfinder, the shutter can close in 1/8000th of a second and will last twice as long. In fact, the external battery grip is actually the same as the GH3. The version 4.5 update is free for existing users.The new GH4 from Panasonic is due out this spring. Every time I turn off the GH4, a yellow triangle with a exclamation mark appears right before it shuts down. I've entered my into GH4 Service Mode in order to check shutter count, but it seems my GH4 got into permanent service mode. We continue to recommend only Apple’s adapters as well as Apple, Canon or TetherTools USB cables. So I've seen some people have had this issue but have not had an answer yet. The cause in all cases was the cheap aftermarket Lightning to USB or USB C-to-A adapter the customer tried to use. During the last couple of months we’ve received a few support requests complaining about non-working USB tethering. To use USB tethering on iPhone and iPad, iOS/iPadOS 13.4 or later is required. The latter is a great way to have the app and the Getting Started Guide open side-by-side while you’re doing your very first Wi-Fi pairing, for example. History logs can be accessed via the Files app on both iPhone and iPad, and ShutterCount now fully supports slide over and side-by-side multitasking on iPads. With this release the iOS version gains a few new features. Speaking of bugs, we’ve fixed a crash that could happen when IPTC information is set to a camera having no IPTC set before, and another one in the iOS version’s copyright info template editor. Update: firmware 1.1.0 is still unusable for Wi-Fi. This is one of the many R5 bugs that Canon should urgently fix with a firmware update, but for now I would recommend to forget Wi-Fi and use USB instead – it works even on iOS. So if you must use Wi-Fi, then be prepared to brew a coffee while the camera connects. Slowness kicks in after the last step of the pairing is done on the camera, as well as in case of all subsequent connections. The same happens with Canon’s own EOS Utility 3 software, just its badly designed, slow-to-operate user interface covers most of this time. Normally a Canon EOS camera would establish a Wi-Fi connection in a second or two, but for the R5 it may take 40-60 seconds. Since the app supports Wi-Fi connections in EOS Utility (Remote control) mode, it’s time to bring another gross R5 fault to the spotlight: glacially slow Wi-Fi connections. The headline feature is Canon EOS R5 support. The latest update to my ShutterCount app is now available for both Mac and iOS on the respective App Store. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |